Compactor Collections...
Our range of electrically powered, portable or static compactors are often the most economical option for customers generating substantial volumes of low density dry wastes. The advantages include economy, cleanliness and improved security.
Wherever possible we will do our best to provide either static or portable compaction equipment for use on your own site. This will enable the final volumes of waste you generate to be significantly reduced. It will also keep vehicle movements and the disruption they create to an absolute minimum.
All of the compactors we provide are efficiently and quickly installed and maintained by our own service engineers. They are easy to use and come in a range of container sizes.
If you prefer, we can design and build specialised loading equipment to meet your specific requirements.
Containers are collected by specialised handling vehicles either according to an agreed schedule or on demand.
Our portable compactors compress waste hydraulically - incorporating power packs which require only single-phase mains supply. An added option is a hydraulic bin lift which raises and empties the Waste Wheeler contents into the compactor. Portable compactors and containers require only a single car-parking space.
Static compactors can be provided for "off dock loading" either by hand or mechanically.
Dedicated mechanised interlocking conveying systems can be designed and installed to deliver waste direct to the compactor. If you need further advice, our Technical Sales Department will also carry out a free site survey and suggest the most suitable and cost effective solutions for your needs.
All our compactors and containers are available in your choice of colour or branded with your logo.
Small portable combined compactor / container
| Overall length | 4280 mm |
| Overall width | 1736 mm |
| Overall height | 2340 mm |
| Loading height | 900 mm |
| Loading aperture | 1300 x 700 mm |
| Volume | 9.5 m3 |
| Running thrust | 21 tonnes |
| Mains fuse | 16 amp |
| Single phase | 240 v |
Large portable combined compactor / container
| Overall length | 6547 mm |
| Overall width | 2489 mm |
| Overall height | 2667 mm |
| Loading height, top | 1295 mm |
| Volume | 25 m3 |
| Running thrust | 30 tonnes |
| Mains fuse | 16 amp |
| Single phase | 240 v |
Static compactor - complete with detachable container and hydraulic loading for Waste Wheeler containers.
| Overall length | 10500 mm |
| Overall width with loader | 3400 mm |
| Overall height required when tipping waste wheelers | 3300 mm |
| Loading height (demounting and loading container) | 5300 mm |
| Volume of container | 27 m3 |
| Mains fuse | 30/45 amp |
| Three phase | 415 v |
Typical Wastes & Ordering Information
The table below shows a list of Typical Wastes where the Compactor Collections Service would be recommended.
Additionally shown are the areas where this service is available. If your area is not shown or for ordering information contact your nearest depot. Alternatively call +44 (0)870 443 8278 for general information.
| Typical Wastes | Coverage Area |
|
 |
Compactors 9.5 m3, 25 m3 & 275 m3 |
|
Mobile Compactors - Small 9.5 m3 |
|
Static Compactor - Large 27 m3 |
